Author [ES] [CA] [PL] [PT] [IT] [DE] [FR] [NL] [DK] [NO] [GR] [TR] Topic: Manual idle adjuster.  (Read 6515 times)

0 Members and 1 Guest are viewing this topic.

Online KildareMan

  • Tiger Jedi
  • *****
  • Posts: 7528
  • Bike: Venom Yellow 800
  • Location: Kildare Ireland
Re: Manual idle adjuster.
« Reply #20 on: July 28, 2017, 09:06:05 PM »
Fitted mine today.  If you have small enough hands you can remove the throttle stop screw with a 2.5mm allen and then your fingers.  The manual adjuster is much easier to attach with the nice big knurled end.
Stupid is as stupid does.  Look Dad... No hands!!

Offline itchywheels

  • Tiger Pro
  • ***
  • Posts: 110
  • Bike: XT600Z Tenere
  • Location: Nottingham
Re: Manual idle adjuster.
« Reply #21 on: July 28, 2017, 09:28:51 PM »
Some thing else for the shopping list !
Into the great wide open, under the skies of blue. Out in the great wide open, a rebel without a clue !!

Online KildareMan

  • Tiger Jedi
  • *****
  • Posts: 7528
  • Bike: Venom Yellow 800
  • Location: Kildare Ireland
Re: Manual idle adjuster.
« Reply #22 on: July 29, 2017, 08:22:51 PM »
Just for variety I remounted the stepper 90 degrees clockwise using as the anchor point it's lower mounting plate mount.  Some locktite on the screw and all good.  The actual roller mechanism I rotated so the roller is uppermost & zip-tied it there. 
Stupid is as stupid does.  Look Dad... No hands!!

Offline Seanocaoimh

  • Tiger Pro
  • ***
  • Posts: 176
  • Bike: Tiger 800
  • Location: Cork blackpool
Re: Manual idle adjuster.
« Reply #23 on: April 13, 2018, 08:49:12 PM »
Q for KildareMan I'm told from dealertool that I can't adjust the idle speed. The oil light comes on when I'm at idle so I'm thinking could I fit the manual adjuster and raise the idle enough to get the light to stay off ? It seems an easy enough
Job , reading what people on this thread say about it . I could check the oil sensor at the same time , what ya think.

Online KildareMan

  • Tiger Jedi
  • *****
  • Posts: 7528
  • Bike: Venom Yellow 800
  • Location: Kildare Ireland
Re: Manual idle adjuster.
« Reply #24 on: April 14, 2018, 10:58:47 AM »
As the other thread.  Check / have checked the actual oil pressure.  DO NOT mask the issue by raising the idle with a manual adjuster.  When you are sorted then think about the manual.  I much prefer it as I have a rock steady idle with not hunting at all - something that always bugs me.
Stupid is as stupid does.  Look Dad... No hands!!

Offline Seanocaoimh

  • Tiger Pro
  • ***
  • Posts: 176
  • Bike: Tiger 800
  • Location: Cork blackpool
Re: Manual idle adjuster.
« Reply #25 on: April 14, 2018, 11:04:37 AM »
Thanks , will do.

Offline Gasman

  • Tiger Master
  • ****
  • Posts: 469
  • Bike: Tiger 800 Roadie
  • Location: EDENFIELD, Bury
Re: Manual idle adjuster.
« Reply #26 on: May 29, 2018, 09:04:43 AM »
I have just checked the link above and it says no longer available. Is that the case or are the parts still available somewhere?
Thanks

Offline digger06

  • Tiger Master
  • ****
  • Posts: 510
  • digger06
  • Bike: tiger 800 xc
  • Location: pontefract
Re: Manual idle adjuster.
« Reply #27 on: June 09, 2018, 08:06:06 AM »
my adjuster was off a honda, the thread etc is quite common , i got mine from a scrappers
« Last Edit: June 09, 2018, 08:09:14 AM by digger06 »

Online ccmp

  • Tiger Member
  • **
  • Posts: 81
  • Bike: 2013 800 xc
Re: Manual idle adjuster.
« Reply #28 on: June 09, 2018, 08:28:37 AM »
Can anyone tell me what the thread size is? I dont want to go stripping tank etc to find out.

Online KildareMan

  • Tiger Jedi
  • *****
  • Posts: 7528
  • Bike: Venom Yellow 800
  • Location: Kildare Ireland
Re: Manual idle adjuster.
« Reply #29 on: June 09, 2018, 10:27:21 AM »
*Originally Posted by ccmp [+]
Can anyone tell me what the thread size is? I dont want to go stripping tank etc to find out.

If I have the correct bag from my box of bits it's M5 - with a 2.5mm recessed hex and a 7mm lock nut
Stupid is as stupid does.  Look Dad... No hands!!

 


Recent Topics