Author [ES] [CA] [PL] [PT] [IT] [DE] [FR] [NL] [DK] [NO] [GR] [TR] Topic: End can  (Read 1857 times)

0 Members and 1 Guest are viewing this topic.

Offline Ripsi

  • Tiger Member
  • **
  • Posts: 60
  • Bike: T800 2011
  • Location: west kingsdown,
Re: End can
« Reply #10 on: June 12, 2018, 12:36:14 PM »
I've got a Pipewerx Carbon Edge

Although it looks the business even with a quiet baffle in its too noisy as i cant tell any different baffel in or out so kinds defats the object. get some nice popping on deceleration though

Had a Fuel can before and i preferred that much more

Good luck, you have loads of choice out there
Foot : Pushbike: CG125 : A100 : Bandit : Hornet  :DL650GT : DL650 : T800

Offline Seanocaoimh

  • Tiger Pro
  • ***
  • Posts: 201
  • Bike: Tiger 800
  • Location: Cork blackpool
Re: End can
« Reply #11 on: June 13, 2018, 05:59:36 PM »
Would it need a remap with any of the end cans ?

Offline Nick_2112

  • Tiger Master
  • ****
  • Posts: 323
  • Location: South Lakes, UK
Re: End can
« Reply #12 on: June 13, 2018, 09:35:24 PM »
Not with the Fuel, some others do need a re-map, some don't.

My Fuel can cost me half as much as a friend paid for his end can on his Tiger. Can't recall what make it was but it was one of the not so common makes.

The fit and finish of the Fuel was every bit as good as his, and I thought it sounded better. I was glad i'd bought the Fuel can.

Offline Orchard Pen

  • Tiger Member
  • **
  • Posts: 38
  • Bike: XRX
  • Location: Halstead
Re: End can
« Reply #13 on: June 14, 2018, 09:38:21 PM »
I have a maxtorque can. Love it. With the baffle in it is fine around town and for cruising but when you open her up you get that lovely howl! With the baffle out shes an animal!!👍😆
Couldnt tell you the exact weight saving but I do remember thinking how much lighter it was than the original when I swapped them over.
Give them a call. Really nice guys and always want to help.

Offline ccmp

  • Tiger Pro
  • ***
  • Posts: 144
  • Bike: 2015 800 xca
Re: End can
« Reply #14 on: June 15, 2018, 12:15:56 PM »
fuel exhaust here also. Grand knocking around but maybe a bit of a drone at constant throttle setting on motorway.

Offline tauzero

  • Tiger Master
  • ****
  • Posts: 487
  • Bike: Tiger 800 XRx
  • Location: Tamworth, UK
Re: End can
« Reply #15 on: June 15, 2018, 07:59:22 PM »
I've got a Fuel carbon fibre end can with baffle - similar noise level to the original at low revs (so as to keep neighbourly relations neighbourly), a bit louder going faster but I don't find it intrusive.
Tiger 800 XRx, Scrambler, SpeedTona, Speed Dent
Gone but not forgotten: Tiger 1050, Bonneville SE, Sprint ST 955i, Trophy 4, Sprint 900, Daytona 900, Tiger 900

Offline Buckr

  • Tiger Member
  • **
  • Posts: 36
  • Bike: Tiger 800 XRX
  • Location: East Yorkshire
Re: End can
« Reply #16 on: June 15, 2018, 08:23:03 PM »
Laguna motorcycles are selling the Arrow cans at 239 at the moment. I've just bought one. Slightly more than the Triumph offer but not bad value,

Offline Rtwo

  • Tiger Jedi
  • *****
  • Posts: 4046
  • Bike: KTM 1290 SAS
  • Location: Co. Durham
Re: End can
« Reply #17 on: June 15, 2018, 08:27:17 PM »
I got an email from Total Triumph Taunton today, linking to this. I'm not sure if it's the old list or not
Tinkering is what happens when you try something you dont quite know how to do, guided by whim, imagination, and curiosity.


Recent Topics