Author [ES] [CA] [PL] [PT] [IT] [DE] [FR] [NL] [DK] [NO] [GR] [TR] Topic: Fitting 'Beak' to 2018 800 XRt?  (Read 2014 times)

0 Members and 1 Guest are viewing this topic.

Online Silverstripes

  • Tiger Master
  • ****
  • Posts: 351
  • Avatar my 955i Tiger 2003/4
  • Bike: Tiger 800 xrt
  • Location: Chudleigh Devon
Re: Fitting 'Beak' to 2018 800 XRt?
« Reply #10 on: December 18, 2018, 09:34:49 PM »
Hey LAzzy 71

Where did you get the silver beak from and those graphics are cracking. where did you source those.

Silverstripes
It wasn't me !!

Offline Lazzy71

  • Tiger Member
  • **
  • Posts: 27
  • Bike: Tiger 800 XRT
  • Location: West Sussex, UK
Re: Fitting 'Beak' to 2018 800 XRt?
« Reply #11 on: December 19, 2018, 04:46:28 PM »
Hi Silverstripes, I got the beak from World of Triumph and the decals from Ebay.

Online walt

  • Tiger Pro
  • ***
  • Posts: 212
  • Location: Northumberland
Re: Fitting 'Beak' to 2018 800 XRt?
« Reply #12 on: December 19, 2018, 05:12:44 PM »
i thought they grew over the 1st year......so my dealer was fibbing..... :027:



Offline NeoHurricane

  • Tiger Member
  • **
  • Posts: 92
  • Live, Love & Respect
  • Bike: '18 Tiger 800XRT
  • Location: SW Derbyshire
Re: Fitting 'Beak' to 2018 800 XRt?
« Reply #13 on: December 19, 2018, 06:31:00 PM »
*Originally Posted by ukAndy [+]
I've got the same blue bike.  I agree looks much better with the beak, I'll get one of those.  Which screen and deflector is that and how much of an improvement over the stock oem screen is it?  I put a Givi Airflow screen on my 2016 T800 and it was perfect (but fugly) but they don't make one for the 2018 (yet).
The screen deflector is the X-Creen Sport from MRA.  I bought mine on Amazon for about 76 quid but now they are 93, maybe wait until after X(Creen)Mas?

Offline sprint

  • Tiger Member
  • **
  • Posts: 89
  • Location: Pevensey
Re: Fitting 'Beak' to 2018 800 XRt?
« Reply #14 on: December 31, 2018, 04:54:47 PM »
Following the fitting of the high level, Beak, mudguard to my 18 XRt I'm not sure if I have fitted the stepped spacer, where the lower fog light brk is fitted to where the large holes in the tank trim and beak support panel go, the correct way?

I have fitted the stepped spacer so that it is fitted between the metal mounting brk and the inner face of the tank trim, see attached, but not sure if it should have gone on the outside between the fog light lower brk and the outside face of the tank trim?

Could somebody with an 18 XRt or XCa kindly have a look and see if the stepped spacer is fitted to the inside of the panels, as my photo, or should it be on the outside?

Thanks

Online Silverstripes

  • Tiger Master
  • ****
  • Posts: 351
  • Avatar my 955i Tiger 2003/4
  • Bike: Tiger 800 xrt
  • Location: Chudleigh Devon
Re: Fitting 'Beak' to 2018 800 XRt?
« Reply #15 on: December 31, 2018, 05:20:23 PM »
It goes between the fog light bracket and plastic trim. :169:

Just looked but also had mine off earlier
It wasn't me !!

Offline sprint

  • Tiger Member
  • **
  • Posts: 89
  • Location: Pevensey
Re: Fitting 'Beak' to 2018 800 XRt?
« Reply #16 on: December 31, 2018, 10:07:39 PM »
*Originally Posted by Silverstripes [+]
It goes between the fog light bracket and plastic trim. :169:

Just looked but also had mine off earlier

Thanks

Offline ubermick

  • Tiger Member
  • **
  • Posts: 19
  • Bike: 2016 Tiger XCA
  • Location: SF Bay Area
Re: Fitting 'Beak' to 2018 800 XRt?
« Reply #17 on: June 13, 2019, 06:32:38 AM »
*Originally Posted by Lazzy71 [+]
Hi Silverstripes, I got the beak from World of Triumph and the decals from Ebay.
Don't suppose you have a part number, by any chance? I'm eyeing a matte silver XRT but can't find a beak in that colour for love nor money!
2016 Tiger XCA - Saoirse

Offline K1W1

  • Tiger Jedi
  • *****
  • Posts: 3834
  • Bike: XRX
  • Location: SE Australia
Re: Fitting 'Beak' to 2018 800 XRt?
« Reply #18 on: June 13, 2019, 09:41:48 AM »
*Originally Posted by ubermick [+]
Don't suppose you have a part number, by any chance? I'm eyeing a matte silver XRT but can't find a beak in that colour for love nor money!

First of all you need the VIN of the bike in question so that you can get to the correct parts page.
When you have the VIN go to this page

https://www.worldoftriumph.com/partscatalog/catalog/select/catalog/triumphmc/method/model/

and scroll down until you find the image of the correct bike and VIN range then open the link up and scroll through the micofiche blocks until you find the one that has the beak and open that and it will give you the appropriate part numbers.

Warning: Not every accessory for every bike is shown.

Offline ubermick

  • Tiger Member
  • **
  • Posts: 19
  • Bike: 2016 Tiger XCA
  • Location: SF Bay Area
Re: Fitting 'Beak' to 2018 800 XRt?
« Reply #19 on: June 15, 2019, 12:20:55 AM »
*Originally Posted by K1W1 [+]
First of all you need the VIN of the bike in question so that you can get to the correct parts page.
When you have the VIN go to this page

Yeah, I've been through their fiche looking for the beak in silver but wasn't able to find it - saw it in blue, black, white, red and whatnot, but not the matte silver which is what I'm looking at. (Don't have the bike yet, currently have an XCA) Nor was I able to find the adapter that the XRT apparently needs.
2016 Tiger XCA - Saoirse

 


Recent Topics