Author [ES] [CA] [PL] [PT] [IT] [DE] [FR] [NL] [DK] [NO] [GR] [TR] Topic: Code p1108  (Read 370 times)

0 Members and 1 Guest are viewing this topic.

Offline Kalechip1

  • Tiger Cub
  • *
  • Posts: 5
  • Bike: 2013 tiger 800
  • Location: Virginia,usa
Code p1108
« on: June 19, 2019, 12:48:58 PM »
Need help with this code on my tiger. P1108 - Ambient air pressure sensor circuit high voltage.  Has anyone everyone solved this?  Do I need to replace the sensor?  The wires that plugged into the sensor looked fine and the plugs for the sensor look good.  Need help on what to do

Offline D6864

  • Tiger Pro
  • ***
  • Posts: 235
  • Bike: White XC
  • Location: Warwickshire,UK
Re: Code p1108
« Reply #1 on: June 19, 2019, 03:39:15 PM »
Service manual says:
- Disconnect ambient pressure sensor
- Check cable for short circuit: ECM pin A27 to ECM pin B01. That's the pink/purple to pink wires on the sensor cable (hope you're not colour blind like I am)
- If short circuit, locate and rectify wiring fault
 - If OK, renew ambient pressure sensor
 - If short circuit, locate and rectify wiring fault
- Reconnect harness, clear fault code and run engine
- If fault still present, contact Triumph service

 


Recent Topics