Author [ES] [CA] [PL] [PT] [IT] [DE] [FR] [NL] [DK] [NO] [GR] [TR] Topic: Engine management light😡  (Read 699 times)

0 Members and 1 Guest are viewing this topic.

Offline Xcxbadge

  • Tiger Pro
  • ***
  • Posts: 104
  • Get on with life
  • Bike: Tiger 800 xcx
  • Location: Somerset
Engine management light😡
« on: January 11, 2020, 01:09:58 PM »
I came back from a ride & put the bike on centre stand selected 2nd gear  to wax the chain which I have done many times before.
But the engine management light came on with codes of p0500 & 1521, which I believe is speed sensor & abs.
I tried this morning when bike is cold the 3 cycles of fan cutting in but has not put the light out.
Has this got to be done via laptop?.
Or has anyone near somerset got a dealer tool😁.
Thanks

Offline KildareMan

  • Tiger Jedi
  • *****
  • Posts: 8350
  • Bike: Venom Yellow 800
  • Location: Naas Ireland
Re: Engine management light😡
« Reply #1 on: January 11, 2020, 01:28:32 PM »
So it's detected your rear wheel traveling much faster than the front. The fact it's not reset might indicate a buggered sensor?
Lost again

Online Stevie.P

  • Tiger Jedi
  • *****
  • Posts: 2998
  • 'Arte et Marte'
  • Bike: 2015 Tiger XRt
  • Location: Plymouth, UK
Re: Engine management light😡
« Reply #2 on: January 11, 2020, 02:59:28 PM »
*Originally Posted by Xcxbadge [+]
I came back from a ride & put the bike on centre stand selected 2nd gear  to wax the chain which I have done many times before.
But the engine management light came on with codes of p0500 & 1521, which I believe is speed sensor & abs.

You created the codes because (as KildareMan said) front wheel stationary, rear wheel revolving at speed (probably above 10MPH when ABS light normally goes out), creating imparity between front and rear ABS speed sensors.

*Originally Posted by Xcxbadge [+]
I tried this morning when bike is cold the 3 cycles of fan cutting in but has not put the light out.
Has this got to be done via laptop?.

It isn't 3 cycles of fan cutting in but 3 complete heat cycles .. go ride bike until normal temperature, park up and let engine go cold, then repeat twice more and MIL should go out. Or can be reset with simple use of Tigertool software and laptop.
Also owned my 1979 Bonnie T140E from new!

We don't stop playing because we grow old .. WE GROW OLD BECAUSE WE STOP PLAYING!!!


Offline Xcxbadge

  • Tiger Pro
  • ***
  • Posts: 104
  • Get on with life
  • Bike: Tiger 800 xcx
  • Location: Somerset
Re: Engine management light😡
« Reply #3 on: January 11, 2020, 05:22:43 PM »

It isn't 3 cycles of fan cutting in but 3 complete heat cycles .. go ride bike until normal temperature, park up and let engine go cold, then repeat twice more and MIL should go out. Or can be reset with simple use of Tigertool software and laptop.

Stevie I got that wrong then, I will take it out which will be more fun.

Online T800XC

  • Premier Member
  • Tiger Jedi
  • *
  • Posts: 2122
  • Bike: Tiger 1200 XRT
  • Location: English Riviera
Re: Engine management light😡
« Reply #4 on: January 11, 2020, 05:57:34 PM »
Take a look here for info on what qualifies as a heat cycle....

https://www.tiger800.co.uk/index.php/topic,13212.msg163900.html#msg163900


  
...happiness isn't happiness without a violin-playing goat...

Offline Xcxbadge

  • Tiger Pro
  • ***
  • Posts: 104
  • Get on with life
  • Bike: Tiger 800 xcx
  • Location: Somerset
Re: Engine management light😡
« Reply #5 on: January 11, 2020, 06:31:51 PM »
*Originally Posted by T800XC [+]
Take a look here for info on what qualifies as a heat cycle....

https://www.tiger800.co.uk/index.php/topic,13212.msg163900.html#msg163900
Quite confusing then 😂😂🤔

Online Stevie.P

  • Tiger Jedi
  • *****
  • Posts: 2998
  • 'Arte et Marte'
  • Bike: 2015 Tiger XRt
  • Location: Plymouth, UK
Re: Engine management light😡
« Reply #6 on: January 11, 2020, 07:48:58 PM »
*Originally Posted by Xcxbadge [+]
Quite confusing then 😂😂🤔

.... just ride as normal whenever you want and on 4th ride MIL should have reset and fault codes will eventually clear from memory (after 40 starts - from memory - if fault cleared). :306:
Also owned my 1979 Bonnie T140E from new!

We don't stop playing because we grow old .. WE GROW OLD BECAUSE WE STOP PLAYING!!!


Offline Xcxbadge

  • Tiger Pro
  • ***
  • Posts: 104
  • Get on with life
  • Bike: Tiger 800 xcx
  • Location: Somerset
Re: Engine management light😡
« Reply #7 on: January 11, 2020, 08:51:04 PM »
Thank guys 👍

Online Stevie.P

  • Tiger Jedi
  • *****
  • Posts: 2998
  • 'Arte et Marte'
  • Bike: 2015 Tiger XRt
  • Location: Plymouth, UK
Re: Engine management light😡
« Reply #8 on: January 12, 2020, 12:02:51 AM »
Download the .pdf in reply #1 which shows the fault codes, heat cycles required to clear MIL and clear cycles to erase fault code from ECU memory.  Worth keeping. :028:

https://www.tiger800.co.uk/index.php/topic,14493.msg176074.html#msg176074
Also owned my 1979 Bonnie T140E from new!

We don't stop playing because we grow old .. WE GROW OLD BECAUSE WE STOP PLAYING!!!


Offline Xcxbadge

  • Tiger Pro
  • ***
  • Posts: 104
  • Get on with life
  • Bike: Tiger 800 xcx
  • Location: Somerset
Re: Engine management light😡
« Reply #9 on: January 12, 2020, 02:03:59 PM »
Went to go out this morning & when I started bike up the light had gone out.
Strange but took it out for a little run & all seems fine.
Thank for all your help.

 


Recent Topics


winded-staunch