How To Use TigerTool V3.3 Service Utility Software

[ANDREASRUDOLFOVO]

Hi friend. My question is:
Can i connect in Tiger 900 with bbfly 32301 And 32302 ?  Or only one?
Second question:
Can connect in another triumph motorcycles? Or only in Tiger??
Thank you so much

[T800XC]

Originally Posted by ANDREASRUDOLFOVO

Hi friend. My question is:
Can i connect in Tiger 900 with bbfly 32301 And 32302 ?  Or only one?
Second question:
Can connect in another triumph motorcycles? Or only in Tiger??
Thank you so much

Either lead can be used. In theory you could run both leads at the same time if you opened two instances of TigerTool, but I don't see why anyone would want or need to do that.

As written in the comprehensive user instructions, TigerTool can be used with other Triumph models, but not all of them and not all features are supported.

[krisdl]

Originally Posted by Lukenrg

Thanks a lot T800XC!!! I used a "bbfly OBD2, BF32301 USB" bougth on Amazon, i have a Tiger 800 xrt 2019 and the program V3.3 worked perfectly!
Thanks again for your help, you are helping everyone everywhere. A big hug from Italy 

Hello there, thank you for listing this.  Could you tell me where you connect this, is it the USB under the seat?  Thank you in advance.

[T800XC]

Originally Posted by krisdl

Hello there, thank you for listing this.  Could you tell me where you connect this, is it the USB under the seat?  Thank you in advance.

USB lead-end to your Windows PC or tablet, OBD2 plug on the interface to the mating socket under the seat.

[krisdl]

Thank you, I was having a daft moment! 

[Blue Flame]

Originally Posted by Untold

[img]
https://www.ebay.co.uk/itm/323778285263?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=QiDWIijFRy6&sssrc=2349624&ssuid=K_XqqyTrTo-&var=&widget_ver=artemis&media=COPY

Purchased this cable and ran the software. It connected to the bike first attempt with no problems.

Many thanks T800XC for this software  . I have dithered over this for a while now but it was so easy. Brilliant

[eskalextric]

I would like to thank you, just run yesterday v3.3 with a Lonelec cable, it worked like a charm, I was able to deal with a dtc error already repaired.
Thanks very much for your dedication to keep this software and doc updated. 

[sleepyguitarman]

My battery died and it has thrown up a fault (P1521). Once I replace the battery me thinks I'm going to need the excellent information and guidance presented here to clear the fault.

I don't go on here a lot but it is a great source to reach out to when I need to be pointed in the right direction.

Thank you T800XC. This is awesome.

[sleepyguitarman]

All done! Faults cleared after battery died and replaced. Saved me bundles. Thank you.