Author [ES] [CA] [PL] [PT] [IT] [DE] [FR] [NL] [DK] [NO] [GR] [TR] Topic: Givi Toolbox  (Read 691 times)

0 Members and 1 Guest are viewing this topic.

Offline Rick B

  • Tiger Member
  • **
  • Posts: 75
  • Bike: 2020 XRT
  • Location: Glossop Derby's
Givi Toolbox
« on: August 05, 2020, 04:39:17 PM »
How do,
Has anyone fitted a Givi toolbox on the Triumph Expedition rails and been able to fit anything of size in due to the pannier frame cross bar obstructing it. Ive modded mine slightly by adding longer m6 bolts with deeper washers so it sits further into the wheel but to get my Airman compressor in(which is why i got it) it has to be on the lowest point ,thus making it catch the chain guard when SWMBO is on the back even on full pree load.
I'll try and send a pic of the offending item when its stopped lagging it down
The Perfect Woman,
A deaf and dumb nymphomaniac that runs an off-licence!

Online Stevie.P

  • Tiger Jedi
  • *****
  • Posts: 3457
  • 'Arte et Marte'
  • Bike: 2015 Tiger XRt
  • Location: Plymouth, UK
Re: Givi Toolbox
« Reply #1 on: August 05, 2020, 05:30:34 PM »
Is this Youtube clip any help? :027:

Also owned my 1979 Bonnie T140E from new!

We don't stop playing because we grow old .. WE GROW OLD BECAUSE WE STOP PLAYING!!!


Offline Rick B

  • Tiger Member
  • **
  • Posts: 75
  • Bike: 2020 XRT
  • Location: Glossop Derby's
Re: Givi Toolbox
« Reply #2 on: August 05, 2020, 05:37:11 PM »
*Originally Posted by Stevie.P [+]
Is this Youtube clip any help? :027:

/>
Cheers Steve,,,
It pretty much the same as what im after as he's using a tool roll  but my hopes was just to get the compressor which is reasonably small and a puncture kit,but same as the vid ,that pesky  cross bar interferes
The Perfect Woman,
A deaf and dumb nymphomaniac that runs an off-licence!

Online Rtwo

  • Tiger Jedi
  • *****
  • Posts: 4494
  • Bike: KTM 1290 SAS
  • Location: Co. Durham
Re: Givi Toolbox
« Reply #3 on: August 05, 2020, 05:46:41 PM »
What size box do you need?
I'm currently working on a bracket to take a Nanuk 903 case on those pannier rails
The party told you to reject the evidence of your eyes and ears. It was their final, most essential command.
....George Orwell

Check the Facts !!

Offline Rick B

  • Tiger Member
  • **
  • Posts: 75
  • Bike: 2020 XRT
  • Location: Glossop Derby's
Re: Givi Toolbox
« Reply #4 on: August 05, 2020, 05:50:55 PM »
*Originally Posted by Rtwo [+]
What size box do you need?
I'm currently working on a bracket to take a Nanuk 903 case on those pannier rails
Is basically some form of moving the box into the wheel without affecting the wheel or mudguard and giving enough room to bypass that cross rail,,
I'll put some pics up tomorrow

Thanks
The Perfect Woman,
A deaf and dumb nymphomaniac that runs an off-licence!

Offline Rick B

  • Tiger Member
  • **
  • Posts: 75
  • Bike: 2020 XRT
  • Location: Glossop Derby's
Re: Givi Toolbox
« Reply #5 on: August 06, 2020, 05:48:50 AM »
This is what Im up against,as you can see looking down the rear cross bar interferes with anything of reasonable size assessing the box.


The Perfect Woman,
A deaf and dumb nymphomaniac that runs an off-licence!

Online Rtwo

  • Tiger Jedi
  • *****
  • Posts: 4494
  • Bike: KTM 1290 SAS
  • Location: Co. Durham
Re: Givi Toolbox
« Reply #6 on: August 06, 2020, 08:49:29 AM »
You need a box that's accessible from the side
The party told you to reject the evidence of your eyes and ears. It was their final, most essential command.
....George Orwell

Check the Facts !!

Online Rtwo

  • Tiger Jedi
  • *****
  • Posts: 4494
  • Bike: KTM 1290 SAS
  • Location: Co. Durham
Re: Givi Toolbox
« Reply #7 on: August 06, 2020, 12:07:44 PM »
This is what I'm currently working on, still a very rough mock up but I'm about there with the positioning



The party told you to reject the evidence of your eyes and ears. It was their final, most essential command.
....George Orwell

Check the Facts !!

Offline K1W1

  • Tiger Jedi
  • *****
  • Posts: 4541
  • Bike: XRX
  • Location: SE Australia
Re: Givi Toolbox
« Reply #8 on: August 06, 2020, 01:28:30 PM »
Make your own. A bit of lateral thinking is all it takes
This cost me about Aud$35 (20) all up including the knock off Pelican case




Offline TheRedKing

  • Tiger Cub
  • *
  • Posts: 2
  • Bike: Tiger 800 (MY14)
  • Location: The Netherlands
Re: Givi Toolbox
« Reply #9 on: August 06, 2020, 02:21:51 PM »
*Originally Posted by Rick B [+]
This is what Im up against,as you can see looking down the rear cross bar interferes with anything of reasonable size assessing the box.




Hmm, not quite what you'd hope for I imagine..
Especially when pulling the trigger to spend some more for a ready-to-go factory solution.

I'd try to move the box either as much upwards/to the back or downwards/to the front (not focusing on the holder but just on the box).
See if there is sufficient room, then try to reposition the mounting plate or make an adapter plate to connect the S250 to the mounting plate..

I have ordered a set as well; but for the Givi PL6401 rack, not the triumph one, the connector bar should interfere a bit less with this one  :155:.

Good luck!

 


Recent Topics