Pages: 1 [2]   Go Down

Author [ES] [CA] [PL] [PT] [IT] [DE] [FR] [NL] [DK] [NO] [GR] [TR] Topic: Valve Clearances, values and interval to check  (Read 1974 times)

0 Members and 1 Guest are viewing this topic.

Offline AvgBear

  • Tiger Jedi
  • *****
  • Posts: 3003
  • Bike: '12 Venom Roadie
  • Location: Missouri USA
Re: Valve Clearances, values and interval to check
« Reply #10 on: January 15, 2021, 04:30:46 PM »
These two references are not the same:

*Originally Posted by SOHUTAA [+]
*Originally Posted by Peterson Pires [+]
Inlet: 0,10 - 0,20mm
Exhaust: 0,275 - 0,325mm
:187:
Logged
“There are a terrible lot of lies going about the world, and the worst of it is that half of them are true.”
WSC

Offline Peterson Pires

  • Tiger Cub
  • *
  • Posts: 7
  • Bike: Tiger 800 xcx
  • Location: Brazil
Re: Valve Clearances, values and interval to check
« Reply #11 on: January 15, 2021, 04:47:37 PM »
Exactly avgbear, that's why I said that the Haynes manual does not specify these values. It is necessary to check according to the Gen of the motorcycle. These values ​​are in the manual (3856764, Edition 1, 11.2012). So I believe it is referring to Gen 1 only.
Logged

Offline AvgBear

  • Tiger Jedi
  • *****
  • Posts: 3003
  • Bike: '12 Venom Roadie
  • Location: Missouri USA
Re: Valve Clearances, values and interval to check
« Reply #12 on: January 16, 2021, 02:04:23 AM »
 :0461: But, in addition to the clearance disparities shown in the SOHUTAA linked chart -- the clearances listed are exceedingly small (inlet clearences almost too small to measure).
And, the "Limit of Service" measurements are larger than the clearance settings. That's not what happens in use -- the clearances tend to close-up / get less (smaller).
All of which seems to sow some doubt on that chart (IMO)?
Logged
“There are a terrible lot of lies going about the world, and the worst of it is that half of them are true.”
WSC

Offline philmcglass

  • Tiger Master
  • ****
  • Posts: 478
  • Mine's a pint
  • Bike: Tiger XRX 2016
  • Location: Embruh
Re: Valve Clearances, values and interval to check
« Reply #13 on: January 16, 2021, 02:22:45 PM »
Extract from xrx 2015 manual
Interval for check (and adjust) 12000miles 20000km

« Last Edit: January 16, 2021, 02:26:46 PM by philmcglass »
Logged
Find the Line

Offline philmcglass

  • Tiger Master
  • ****
  • Posts: 478
  • Mine's a pint
  • Bike: Tiger XRX 2016
  • Location: Embruh
Re: Valve Clearances, values and interval to check
« Reply #14 on: January 16, 2021, 02:59:42 PM »
SOHUTAA  data seems to be valve stem to guide clearance.

Logged
Find the Line

Offline AvgBear

  • Tiger Jedi
  • *****
  • Posts: 3003
  • Bike: '12 Venom Roadie
  • Location: Missouri USA
Re: Valve Clearances, values and interval to check
« Reply #15 on: January 16, 2021, 04:59:52 PM »
 :460: Thanks, that clears it up.
Logged
“There are a terrible lot of lies going about the world, and the worst of it is that half of them are true.”
WSC

Offline SOHUTAA

  • Tiger Pro
  • ***
  • Posts: 200
  • Bike: T800 Xcx 2016
  • Location: FRANCE
Re: Valve Clearances, values and interval to check
« Reply #16 on: January 16, 2021, 07:52:01 PM »
*Originally Posted by philmcglass [+]
SOHUTAA  data seems to be valve stem to guide clearance.



Sorry, actually I got the wrong table. . .  :034:
Logged

Online PapaTom

  • Tiger Master
  • ****
  • Posts: 829
  • Bike: Blue XRx (Gen2)
  • Location: Barnsley, UK
Re: Valve Clearances, values and interval to check
« Reply #17 on: January 17, 2021, 11:32:35 AM »
*Originally Posted by philmcglass [+]
Extract from xrx 2015 manual
Interval for check (and adjust) 12000miles 20000km



*  As shown in my Haynes manual. *
Logged
Pages: 1 [2]   Go Up
 


Recent Topics


winded-staunch