Author [ES] [CA] [PL] [PT] [IT] [DE] [FR] [NL] [DK] [NO] [GR] [TR] Topic: TIGER 900GT aftermarket screens  (Read 765 times)

0 Members and 1 Guest are viewing this topic.

Offline bazthebike

  • Tiger Member
  • **
  • Posts: 74
  • Bike: Explorer/900GT
  • Location: Southwest - UK
TIGER 900GT aftermarket screens
« on: June 09, 2021, 07:43:23 AM »
Hi all, can anyone offer advice or recommendation on aftermarket screens. I have been looking at MRA, GIVI, PUIG. Would like to hear of anybodys expierence with any of these. Thanks in advance. (TIGER 900GT ).

Offline mcinlb

  • Tiger Master
  • ****
  • Posts: 507
  • Bike: 2020 Tiger 900GT
  • Location: Scotland
Re: TIGER 900GT aftermarket screens
« Reply #1 on: June 09, 2021, 09:00:23 AM »
Hi , I changed to an MRA screen on my 900GT, -

https://www.bikehps.com/acatalog/Triumph_Tiger_900_GT_Pro_MRA_Motorcycle_Touring_Screens.html#aCOL68784

The standard screen is good, but there is a lot of buffeting on the sides of the body. This screen is wider and cuts this down. It is actually shorter in height but I have not found this to be a problem, the flow just crests the top of my helmet ...

Offline uglybeard

  • Tiger Member
  • **
  • Posts: 23
  • Bike: Tiger 900 GT Pro
  • Location: Haywards Heath
Re: TIGER 900GT aftermarket screens
« Reply #2 on: June 10, 2021, 05:38:33 PM »
I fitted a Calsci (large).  It gave a lot of helmet buffeting and I was going to ditch it.  However, I bought a little MRA spoiler on this site and it has transformed it.  It is really good now.  I just put it on for trips as it isn't needed for just running around as the standard screen is adequate for that.

Regards,

Richard

Offline DFW900GTRider

  • Tiger Member
  • **
  • Posts: 17
  • Bike: Tiger 900 GT
  • Location: DFW, TX
Re: TIGER 900GT aftermarket screens
« Reply #3 on: June 17, 2021, 09:42:33 PM »

Offline mcinlb

  • Tiger Master
  • ****
  • Posts: 507
  • Bike: 2020 Tiger 900GT
  • Location: Scotland
Re: TIGER 900GT aftermarket screens
« Reply #4 on: July 02, 2021, 08:43:50 AM »
As an update on my MRA screen, I did an extended run on a m'way and there is a bit of wind noise over the top of the screen, goes away when you dip down a bit, so.
Fitted an X screen blade on top -
https://www.bikehps.com/acatalog/MRA_X-creen_Sport_Motorcycle_Windshield_Spoiler_Defelctor.html

Should have ordered the screen with it fitted the first time, this should do the job..

Offline bazthebike

  • Tiger Member
  • **
  • Posts: 74
  • Bike: Explorer/900GT
  • Location: Southwest - UK
Re: TIGER 900GT aftermarket screens
« Reply #5 on: July 02, 2021, 05:08:19 PM »
Have now purchased and fitted mra screen. It def improves the airflow around the sides over the oem one.

 


Recent Topics


winded-staunch