Triumph Tiger 800 Forum

Tiger 800 - Main Discussion Section => Electrical, Lighting, and Wiring => Topic started by: captainjm on October 20, 2019, 08:16:04 PM

Title: 2018 XRX Fuse Block
Post by: captainjm on October 20, 2019, 08:16:04 PM
Any advice on fitting a fuse block for 2018 800  xrx. I want to supply GPS, heated vest, scottoiler
Who supplies the block etc

Thanks
Title: Re: 2018 XRX Fuse Block
Post by: Oldfart on October 20, 2019, 09:51:06 PM
I use one of these, easy to fit

https://innovv.co.uk/products/powerhub/

Oldfart

Title: Re: 2018 XRX Fuse Block
Post by: mcinlb on October 21, 2019, 08:34:53 AM
I fitted a "FuseBlock" on my 2018 XRX, removed the plastic thing on top of the battery and mounted it atop the battery with a piece of thin foam sheet between. Uses the rubber band to keep it in place, no issues in the last year...
Title: Re: 2018 XRX Fuse Block
Post by: Nelizzz on October 21, 2019, 11:35:30 PM
I use PDM60, not cheap but fancy.
Title: Re: 2018 XRX Fuse Block
Post by: K1W1 on October 22, 2019, 03:02:42 AM
Eastern Beaver 3CS. Three circuits and you can buy a switched or unswitched set up.
Title: Re: 2018 XRX Fuse Block
Post by: Little H on October 22, 2019, 08:12:21 AM
I use this from Nippy Norman's in Paignton, bit expensive though now.

https://www.nippynormans.com/fuse-panels/fuzeblock-switchable-fuse-panel

It's fitted on an insulated base under the pillion seat and uses the tool kit rubber strap to keep it in place. 
Title: Re: 2018 XRX Fuse Block
Post by: KildareMan on October 22, 2019, 09:21:05 AM
K1W1 has it. Eastern Beaver 3CS. Great little fuse block.