TuneEcu TPS Voltage

[steveg]

Hello

Just hooked up TuneEcu to check for errors and was looking at Sensor voltages

Just wondering what the Throttle values should be ?

Looked in Haynes and no settings

Mine are showing

16.2 & 0.67v

Cheers Steve

[steveg]

From some research looks like my TPS settings are too high as should be 0.60v +-0.02V

Will this have an impact to bike ?

Thanks Steve

[D6864]

The target voltage only applies during the calibration process when the Triumph diagnostic tool commands the ECU to close the throttle fully.  It's normal for the voltage to be a bit higher the rest of the time.  I'd leave it alone unless you have a problem.

[steveg]

Many thanks

Yep bike is running ok at the moment , so will leave as is

Cheers Steve